I. Features:
The elastomer is made of alloy steel and the surface is electroplated; the strain gauge material is imported from the United States and Japan, and it is glued and sealed. It is suitable for a variety of working environments, with simple structure and easy installation; It is used in the pull and pressure test equipment such as plug force tester and the field of automation equipment and testing; range: 1, 2, 5, 10, 20KN.
Two, wiring method
Three, technical parameters
| Sensor range | KN | 1/2/5/10/20 |
| Accuracy class |
|
|
| Composite error | FS | 0.03% |
| Sensitivity | MV/V | 1.2±0.2 |
| Zero output | FS | ±1% |
| Creep | %FS/30MIN | ±0.05 |
| Zero point temperature effect | %FS/10℃ | ±0.05 |
| Sensitivity temperature effect | %FS/10℃ | ±0.5 |
| input resistance | Ω | 350±5 |
| Output impedance | Ω | 350±5 |
| Insulation resistance | MΩ | ≥5000(100V) |
| Temperature compensation range | °C | -10-40 |
| Operating temperature range | °C | -35-65 |
| Excitation voltage | V | 5-12 (DC) |
| Safe overload range | % | 150 |
| Protection level |
| IP65 |
| wire | M | 1.5m Φ3 shielded wire |
Four. Dimensions
